Microsoft Official Exam Center Latest Added Questions and Answers Free Download from Braindump2go!

Vendor: Microsoft
Exam Code: 70-680
Exam Name: TS: Windows 7, Configuring

120[2][2]

QUESTION 191
You support Windows 7 client computers used by Marketing department employees. The computers have dual-core CPUs for generating rich media advertisements. The Marketing department employees are reporting CPU performance issues while rendering the rich media advertisements.
You need to configure the wmplayer.exe process to use only a single CPU core.
What should you do?
(To answer, select the appropriate option or options in the answer area.)

wpsE3A4.tmp_thumb

Answer:

wpsFEB3.tmp_thumb

QUESTION 192
You use a computer that has Windows 7 Enterprise installed. The computer has a single 500-GB hard disk. You install two new 1-TB hard disks.
You need to configure the new disks in a fault-tolerant configuration.
What should you do? (To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.)

wps8CB1.tmp_thumb

Answer:

wpsAAEB.tmp_thumb

QUESTION 193
Note: This QUESTION is part of a series of QUESTIONs that use the same set of answer choices. Ananswer choice may be correct for more than one QUESTION in the series.
Your company office network includes a file server that has Windows Server 2008 R2 installed and client computers that have Windows 7 Enterprise installed. The computers are members of an Active Directory domain. The file sender has the BranchCache feature installed.
You create a shared folder on the server and enable BranchCache on the shared folder.
You discover that the users of the client computers are unable to access files in the shared folder. You need to provide access for the users to the shared folder.
What should you do?

A.    Run the Netsh branchcache set service mode= HOSTEDSERVER clientauthentication=NONE command.
B.    Configure firewall exception rules for multicast traffic, inbound and outbound traffic for local UDP port 3702,
and inbound and outbound traffic for local TCP port 80.

C.    Create a Group Policy that sets Hash Publication for BranchCache as disabled.

D.    Run the Netsh branchcache set service mode=DISTRIBUTED command.

E.    Create a Group Policy object and configure the Set percentage of disk space used for client computer
cache option.

F.    Check permissions.

G.    Run the Netsh branchcache set service mode=HOSTEDCLIENT command.

H.    Create a Group Policy object and enable the Set BranchCache Hosted Cache mode policy.

I.    Configure firewall exception rules for inbound and outbound traffic for local TCP port 80 and for inbound
and outbound traffic for local TCP port 8441.

Answer: F
Explanation:
Have the users been given access to the files (what does BranchCache have to do with accessing files locally etc).

QUESTION 194
Note: This QUESTION is part of a series of QUESTIONs that use the same set of answer choices. Ananswer choice may be correct for more than one QUESTION in the series.
Your company office network includes a file server that has Windows Server 2008 R2 installed and client computers that have Windows 7 Enterprise installed. The computers are members of an Active Directory domain. The file server has the BranchCache feature installed.
You add new client computers the network. The computers have Windows 7 installed and are members of a workgroup.
You need to ensure that the new client computers are configured to cache and share files.
What should you configure on the new client computers?

A.    Configure firewall exception rules for inbound and outbound traffic for local TCP port 80 and for inbound
and outbcund traffic for local TCP port 8443.

B.    Check permissions.

C.    Create a Group Policy that sets Hash Publication for BranchCache as disabled.

D.    Run the Netsh branchcache set service mode=HOSTEDCLIENT command.

E.    Create a Group Policy object and enable the Set BranchCache Hosted Cache mode policy.

F.    Create a Group Policy object and configure the Set percentage of disk space used for client computer
cache option.

G.    Run the Netsh branchcache set service mode=HOSTEDSERVER clientauthentication=NONE command.

H.    Run the Netsh branchcache set service mode=DISTRIBUTED command.

I.    Configure firewall exception rules for multicast traffic, inbound and outbound traffic for local UDP port 3702,
and inbound and outbound traffic for local TCP port 80.

Answer: H

QUESTION 195
Note: This QUESTION is part of a series of QUESTIONs that use the same set of answer choices. Ananswer choice may be correct for more than one QUESTION in the series.
Your company office network includes a file server that has Windows Server 2008 R2 installed and client computers that have Windows 7 Enterprise installed. The computers are members of an Active Directory domain. The File server has the BranchCache feature installed.
All client computers have Windows Firewall along with Advanced Security enabled for all network profiles.
You need to ensure that client computers, can access cached files stored on the file server.
What should you do?

A.    Run the Netsh branchcache set service mode=HOSTEDSERVER clientauthentication=NONE command.
B.    Create a Group Policy that sets Hash Publication for BranchCache as disabled.
C.    Run the Netsh branchcache set service mode=DISTRIBUTED command.
D.    Check permissions.
E.    Configure firewall exception rules for multicast traffic, inbound and outbound traffic for local UDP port
3702, and inbound and outbound traffic for local TCP port 80.

F.    Run the Netsh branchcache set service mode=HOSTEDCLIENT command.

G.    Configure firewall exception rules for inbound and outbound traffic for local TCP port 80 and for inbound
and outbound traffic for local TCP port 8443.

H.    Create a Group Policy object and enable the Set BranchCache Hosted Cache mode policy.

I.    Create a Group Policy object and configure the Set percentage of disk space used for client computer
cache option.

Answer: F

QUESTION 196
You administer client computers that have Windows 7 Enterprise installed. A server named Server1 has an IP address of 10.10.4.56. The server accepts Remote Desktop connections at a custom port 10876.
You need to connect to the server from a client computer by using Remote Desktop.
What should you do?

A.    From an elevated command prompt, run mstsc.exe /v:Server1:10876.
B.    From an elevated command prompt, run mstsc.exe 10.10.4.56 port: 10876.
C.    From an elevated command prompt, run mstsc.exe Server1 port:10876.
D.    From the Advanced tab of your Remote Desktop connection, configure the IP address and port of Server1
as the RD Gateway Server.

Answer: A

QUESTION 197
Your company network includes client computers that have Windows 7 installed. The computers are members of an Active Directory domain and receive Windows Firewall configuration through Group Policy, A user indicates that he is unable to connect to a remote FTP server.
You need to view the status of TCP/UDP ports at the user’s computer.
Which command should you run?

A.    Netstat -o
B.    Nbtstat -a
C.    Ipconfig /all
D.    Netstat -an

Answer: D

QUESTION 198
Your company network has a single-domain Active Directory forest. The forest functional level is set to Windows Server 2008 R2. All computers are members of the domain.
You plan to deploy Windows BitLocker Drive Encryption (BitLocker) on portable computers that have Windows 7 Enterprise installed.
You need to be able to automatically back up recovery passwords for BitLocker-protected disk volumes on the portable computers.
What should you do before you start encrypting the disk volumes with BitLocker?

A.    Run the cscript Add-TPMSelfWriteACE.vbs script on the portable computers.
B.    Run the cscript List-ACEs.vbs script on the portable computers.
C.    Run the cscript Get-TPMOwnerInfo.vbs script on the client computers.
D.    Select the Turn on Bitlocker backup to Active Directory option in local policy on the portable computers.

Answer: D

QUESTION 199
You use a client computer named Accounting that has Windows 7 SP1 installed. The computer allows connections from other computers that have any version of Remote Desktop installed.
The computer has a locally attached printer shared as Printer1.
An Accounting Users group is a member of the local Remote Desktop Users group on the computer. Only the Accounting Users group has access to Printer1. A user named User1 is a member of Accounting Users.
You need to configure the computer to meet the following requirements:
– Prevent User1 from establishing Remote Desktop sessions to the Accounting computer.
– Allow other members of Accounting Users to connect to the Accounting computer by using Remote Desktop.
– Ensure that User1 can access Printer1.
What should you do?

A.    Remove the Accounting Users group from the Remote Desktop Users group.
B.    Remove User’ from the Accounting Users group.
C.    Assign the Deny access to this computer from the network user right to User1.
D.    Assign the Deny log on through Remote Desktop Services user right to User1.

Answer: D
Explanation:
D is the only method that can achieve this without affecting other groups. A and B could be equally valid by adding an additional step (adding individual users to resources).

QUESTION 200
You administer desktops computers that have Windows XP Professional SP3 64-bit installed.
The computers have the Volume Shadow Copy Service (VSS) enabled on all drives.
You want to migrate user profiles to Windows 7 using the User State Migration Tool (USMT) 4.0.
You also plan to migrate files from the user profiles even if the files are locked by applications. You need to capture user profiles and locked files.
What should you do on the Windows XP computers?

A.    Stop the VSS before running scanstate.exe.
B.    Stop the VSS before running loadstate.exe.
C.    Run scanstate /vsc.
D.    Run scanstate /hardlink.

Answer: C
Explanation:
http://technet.microsoft.com/en-us/magazine/dd443646.aspx

QUESTION 201
A user reports that he is unable to start his computer. He provides the following information:
– The boot partition is encrypted by using BitLocker Drive Encryption (BitLocker).
– The user cannot locate his BitLocker recovery key.
You need to start Windows 7 on the computer. The solution must use the minimum amount of administrative effort. What should you do?

A.    From the BIOS, disable the Trusted Platform Module (TPM).
B.    Start the computer from the Windows 7 installation media and select Repair your computer.
C.    Start the computer from the Windows 7 installation media, press SHIFT + F10, and then run chkdsk.
D.    Start the computer from the Windows 7 installation media and select Install now.

Answer: D
Explanation:
No recovery key = no recovery. Time to install.
Any other option defeats the whole point of encrypting it. Encrypted volumes are locked when the encryption key is not available. When the operating system volume is locked, you can boot only to recovery mode. In recovery mode, you can enter the BitLocker password or you can attach the USB device that has the recovery key stored and restart the computer. Once you enter the recovery password or key, you can boot your computer normally.
The following events trigger recovery mode:
* The boot environment changes. This could include one of the boot files being modified.
* TPM is disabled or cleared.
* An attempt is made to boot without the TPM, PIN, or USB key being provided.
* You attach a BitLocker-encrypted operating system volume to another computer.

QUESTION 202
Your company network includes portables computers that have Windows 7 Ultimate and Windows 7 Professional installed.
You want to standardize all portable computers to Windows 7 Professional for Key Management Server (KMS) licensing purpose.
You need to install Windows 7 Professional on all Windows 7 Ultimate portable computers What should you do?

A.    Launch Windows Update.
B.    Perform a clean installation over the existing system partition.
C.    Perform a clean installation on a non-system partition.
D.    Supply the Windows 7 Professional KMS Key.
E.    Launch Windows Anytime Upgrade.

Answer: B

QUESTION 203
Note: This QUESTION is part of a series of QUESTIONs that use the same set of answer choices. Ananswer choice may be correct for more than one QUESTION in the series.
A company has a new deployment of Windows Deployment Services (WDS), the Microsoft Deployment Toolkit (MDT), and the Windows Automated Installation Kit (WAIK).
You need to capture an image of a Windows 7 reference computer.
Which two actions should you perform on the server before performing actions on the reference computer? (Each correct answer presents a complete solution. Choose two.)

A.    Run the Dism command with the /Mount-Wim option.
B.    Create a capture image in WDS.
C.    Run the BCDEdit command.
D.    Run the Dism command with the /Add-Driver option.
E.    Run the ImageX command with the /mount parameter.
F.    Use Sysprep with an answer file and set the UpdateInstalledDrivers option in the answer file to No.
G.    Add a boot image in WDS.
H.    Run the Start /w ocsetup command.
I.    Run the PEImg /prep command.
J.    Run the Diskpart command and the attach command option.
K.    Use Sysprep with an answer file and set the UpdateInstalledDrivers option in the answer file to Yes.
L.    Use Sysprep with an answer file and set the PersistAllDeviceInstalls option in the answer file to True.
M.    Run the Dism command with the /Add-Package option.
N.    Use Sysprep with an answer file and set the PersistAllDeviceInstalls option in the answer file to False.

Answer: BG
Explanation:
http://technet.microsoft.com/en-us/library/cc766320(v=ws.10).aspx
MDT relies on boot images created in WDS, WAIK is a collection of tools that you use to help automate deployment.
To capture an image created on a reference computer you need to add a boot.wim files to WDS, then using the boot.wim, create a capture wim file (usually called capture.wim).
This allows you to capture a a reference computer.

QUESTION 204
Note: This QUESTION is part of a series of QUESTIONs that use the same set of answer choices. Ananswer choice may be correct for more than one QUESTION in the series.
A company has client computers that run Windows 7 Enterprise.
Users complain that Windows displays too many notifications when they try to install software or make changes to their computer.
You need to decrease the number of notifications that Windows displays when users try to install software or make changes to their computer.
Which two choices should you use to achieve this goal?
(Each correct answer presents a complete solution. Choose two.)

A.    Local Users and Groups
B.    The Services Management console
C.    The Netsh command
D.    The Group Policy Management console
E.    Share Permissions
F.    The Folder Properties window
G.    Device Manager
H.    The Icacls command
I.    The User Account Control Settings Control Panel window

Answer: DI

QUESTION 205
Your corporate network contains a Remote Desktop Gateway (RD Gateway) server named Server1 and a Remote Desktop Session Host (RD Session Host) server named Server2.
You have a computer named Computer1 that runs Windows 7.
You use Computer1 from home. You need to access Server2 from Computer1.
What should you do?

A.    Run Mstsc.exe /admin /v:server2:443.
B.    Run Mstsc.exe /console /v:server2:8080.
C.    Create a Remote Desktop Connection and modify the Connect from anywhere settings.
D.    Create a Remote Desktop Connection and modify the Server authentication settings.

Answer: C
Explanation:
To connect using an RD Gateway server, navigate to the Advanced tab of the Remote Desktop Connection Properties dialog box and click Settings under Connect From Anywhere. This opens the RD Gateway Server Settings dialog box. This dialog box allows you to specify RD Gateway settings, including whether or not you want the RD Gateway to be detected automatically, whether to use a specific RD Gateway server, as shown in the firgure, or you can specify Do Not Use an RD Gateway Server, which is the default setting.

wps34A4.tmp_thumb


Guaranteed 100% Microsoft 70-680 Exam Pass OR Full Money Back! Braindump2go Provides you the latest 70-680 Dumps PDF & VCE for Instant Download!

120[2][2]

http://www.braindump2go.com/70-680.html